How to Turn Ringer on Uniden Dect 6.0
© 2012 Uniden America Corp. Printed in Vietnam Ft. Worth, Texas U01UN471BZZ(0)
Base with answering system and cordless handset For model numbers: You should have (handset/charger): D1484/D1481-21 of each D1484/D1481-32 of each D1484/D1481-43 of each D1484/D1481-54 of each D1484/D1481-65 of each
What's in the box?
Not pictured for handset/charger:
x
Rechargeable battery (BT-1021)
x
Battery cover
x
AC adapter (PS-0035) Accessory handset and charger Not pictured for base:
x
Rechargeable battery (BT-1021)
x
Battery cover
x
AC adapter (PS-0035)
x
Telephone cord
x
If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products!
x
Call waiting, CID, CIDCW, and Voice Mail are telephone line services. Contact your provider for details.
x
Need help? Get answers 24/7 at our website:
www.uniden.com
.
If You...Contact Uniden's...Phone Number
have a question or problem Customer Care Line* 817-858-2929 or 800-297-1023 need a part or an accessoryParts Department*800-554-3988 need special assistance due to a disability Accessibility Help Line 800-874-9314 (voice or TTY)
* During regular business hours, Central Standard Time; see our website for detailed business hours.
D1484/D1481 Series User's Guide
2 - English
Important Safety Instrucons
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
x
This unit is NOT waterproof.
DO NOT expose it to rain/moisture.
x
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
x
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
x
Do not use the telephone to report a gas leak in the vicinity of the leak.
x
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.
x
Do not place the handset in any charging cradle without the battery installed and the battery cover securely in place.
SAVE THESE INSTRUCTIONS CAUTION! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not open or mutilate the battery. Disconnect the battery before shipping this product.
Geng Started
.......................................3
Installing Your Phone ...............................3
Geng to Know Your Phone
...................4 Using the Menu .......................................6
Using Your Phone ...................................7
Basics .......................................................7 Finding the Handset .................................8 Using the Phonebook, Caller ID, and Redial Lists ............................................8
Mul-Handset Features
...........................9 Using a Voice Mail Service .....................10
Using the Answering System ................10
Answering System Opons
(
Answering Setup
) .........................10
Personalizing the Greeng
.....................11 Accessing the Answering System ...........11
Geng Your Message
............................12 Using the System While You're Away from Home ................................12
Important Informaon
.........................13
Troubleshoong
.....................................13
Adapter and Baery Informaon
..........15
Compliance Informaon
........................16 Warranty (1 Year, Limited) ....................17
What's in the manual?
English - 3
GETTING STARTED
Installing Your Phone
Charge the Baery
1. Unpack all handsets, battery packs, and battery covers. If you need to remove a cover, press in on the notch and slide the cover down and off. 2. Line up the battery connector with the jack inside the handset; the connector only fits one way. 3. Push the connector in until it clicks into place; tug gently on the wires to make sure the battery is securely connected. 4. Replace the battery cover and slide it into place. 5. Use an AC adapter to connect the power jack on the base to a regular indoor (120V AC) power outlet. Connect any chargers the same way. 6. Place a handset in the base with the display facing forward. If the display doesn't light up, reseat the handset or connect the base to a different outlet. For 2 or more handsets, place each handset in a charger.
B
Charge the handset completely (about 15 hours) before using.
Connect the Telephone Cord
1. Use the telephone cord to connect the
TEL LINE
jack on the base to a standard telephone wall jack.
B
If the display says
Check Tel Line,
check the connection between the base and the phone jack.
2. If you are mounting the phone on the wall, place the mounting slots (on the rear of the base) over the pins on the wall plate; slide the base down to lock it into place.
Test the Connecon
Make a quick test call. Pick up the handset and press
TALK/FLASH
. (Press
END
to hang up.)
x
If there's a lot of noise, check for interference (see p. 14).
x
If you keep hearing a dial tone, change to pulse dialing (see below).
Changing from Tone to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse dialing, you need to change your phone's dial mode. 1. Press
MENU/SELECT
and select
Global Setup
. 2. Select
Dial Mode
then
Pulse
. You'll hear a confirmation tone. To send DTMF tones during a call (e.g., for an automated response system), press
*
to temporarily switch to tone dialing. When you hang up, the phone automatically returns to pulse dialing.
How to Turn Ringer on Uniden Dect 6.0
Source: https://www.scribd.com/document/119877678/UNIDEN-Dect-6-0-D1484-D1481-Manual